PosiTector 6000 Microprobes

Article No. 5624

Probe F45S, 45° Microprobe, 0-45 mil

The Positector 6000 0/45/90° Cabled Microprobes have the smallest measuring tip and best thin-film accuracy of other probes. A 90° Extended Length Microprobe is also available.

Select your model

excl. taxes & shipping cost

Features

Models include the F0S, N0S, F45S, N45S, F90S, N90S, and F90ES
Ideal for measuring on small parts, hard-to-reach areas, or close to edges
Good for thin films
The F0S and N0S have a quick release adapter that makes them constant pressure probes for alignment on small, flat or curved parts. The adapter is held in place by a spring. If the sleeve is not required, simply pull it off the probe.
The F90S and N90S feature a right angle probe for measuring within areas of low headroom
The F90ES has a right angle extended length (350 mm / 13.75") probe for measuring within areas of low headroom

Technical Attributes

Data

Probe Model	F0S	N0S	F45S	N45S	F90S	N90S	F90ES
Substrates:	Ferrous	Non-ferrous	Ferrous	Non-ferrous	Ferrous	Non-ferrous	Ferrous
Range:	0 - 45 mils (0 - 1150 µm)	0 - 25 mils (0 - 625 µm)	0 - 45 mils (0 - 1150 µm)	0 - 25 mils (0 - 625 µm)	0 - 45 mils (0 - 1150 µm)	0 - 25 mils (0 - 625 µm)	0 - 45 mils (0 - 1150 µm)
Accuracy:	±(0.02 mils + 1%) 0 - 4 mils ±(0.1 mils + 3%) > 4 mils ±(0.5 µm + 1%) 0 - 100 µm ±(2 µm + 3%) > 100 µm
Calibration Standards:	S2 & A2
Accuracies are stated as a fixed value plus a percentage of the gage's actual reading