Cross Hatch Kit, 6-edges
Article No. 5121
Cross-Cut Kit 11, 6-edges 1.5 mm
Adhesion Tester 11 blades 1.5mm spacing - ASTM D3359
- 11 Teeth
- 1.5 mm Cutter Spacing
- In accordance with ASTM methods
Features
The crosshatch paint adhesion test kits have a wide selection of cross-cut blades to comply with the appropriate ASTM and ISO coating adhesion test methods.
- Blades made from hardened steel alloy for long life
- Pivoting head blade holder for easy alignment onto the coating surface
- Multi-cut blade edges for long term use
- Blades compliant with ASTM D3359 and ISO 2409
- Test kits comes with all the accessories necessary to perform cross-hatch test
Technical Attributes
-
- Material
- wooden handle
-
- Standard/Cutter Spacing
- - 1.5 mm
-
- Standard
- ASTM
-
- No. of Cutting Edges
- 6
-
- No. of Teeth
- 11
-
- Cutter Spacing
- 0.06 in
-
- Cutter Spacing
- 1.5 mm
-
- Hex Wrench included
- no
Technical Properties
Technical Specifications
Standards
Procedure
- Make a lattice pattern in the film with the appropriate tool, cutting to the substrate.
- Brush several times lightly backwards and forwards, using a soft brush or tissue to remove any detached flakes or ribbons of coatings.
- Place a tape over the cut, smooth it firmly with a fingertip and remove the tape.
- Examine the grid area using an illuminated magnifier.
ASTM D 3359 Standard describe that the number of cuts shall be 6 or 11. The spacing of the cuts in each direction shall be equal and shall depend on the thickness of the coating as follows:
11 cut lines for 1 mm/1.5 mm cutter used at film thickness up to 50µm (2 mils)
6 cut lines for 2 mm cutter used at films thickness between 50-125µm (2 - 5 mils)
Delivery Content
Cross-Cut Tester kit with blade
Magnifier (5136)
Cleaning brush (5135)
One roll of adhesive tape
Manual
Carrying case
Magnifier (5136)
Cleaning brush (5135)
One roll of adhesive tape
Manual
Carrying case
Downloads
Short Instructions
Accessories