Pressure Density Cup
Article No. 14159
Pressure Density Cup 100ml
The Pressure Density Cup, VF2095, helps remove entrapped air bubbles in the liquid being tested that affects density or specific gravity (SG) tests.
Features
- Fixed internal volume of 100 ml. which is to be compressed by the mechanism of the density cup
- Helps entrapped gas and air within material after rotation, agitation or dispersion
- Under pressure the air will dissolve better into the liquid and any bubbles that are left undissolved will be compressed to a fraction of their original size.
- Minimizes the effect of entrapped air bubbles
- Desktop holder
- Calibration certificate
- High level of repeatability
- Pressure density cup 100 ml
- Brush 25 mm and 40 mm
- Can easily be taken apart to allow easy cleaning
Technical Attributes
-
- Data
-
Dimensions (L x W x H): 250 x 90 x 50mm / 9.8 x 3.5 x 2.0 inch Weight: Pressure density cup: 875 g / 1.93 lbs
Cup, holder, brushes: 1750 g / 3.86 lbsMaterial: Stainless steel Compression: 10bar Volume: 100ml* Accuracy: Valve: +/- 1 bar
Volume: +/- 1ml*The included calibration certificate describes the exact volume
Standards
EN ISO 2811-4
Procedure
- The Pressure Density Cup takes a fixed volume (100 ml) of the sample and compresses it so that any errors due to entrapped air or gas are eliminated.
- By then weighing the pressurised sample, true density can be calculated.
- Repeatability of this test is therefore very good.
Delivery Content
Pressure density cup 100 ml, Desktop holder, Brush 25 mm and 40 mm, Calibration certificate