TQC Drying Time Recorder

• Data

  Operating Temperature:	-20°C to +70°C / -4°F to 158°F (non-condensing)
  Drying Time Range:	1 minute to 200 hours
  Time Accuracy:	< 1% of set time
  Maximum Track Length:	300 mm
  Maximum Number of Tracks:	6
  Force Per Needle:	3.5 g / 0.03 N
  Weight of Additional Weights:	5 g
  Diameter of Needle:	2 mm
  Radius of Needle:	1 mm
  Test Beds:	2 x triple track 350 mm X 100 mm X 3 mm glass bed (supplied), or 6 x solo track 305 mm X 25 mm X 3 mm glass bed, or Custom bed; max dimensions W 200mm x L 400mm* x H 8mm - *Test surface is always 300 mm in length - 400 mm length max. without extra support. Longer panels need an extra 125mm high support.
  Material:	Stainless steel, powdercoated steel, anodised aluminium, nylon, glass
  D x W X H:	335 mm x 400 mm x 190 mm
  Net. Weight:	9.5 kg
  Power Supply:	Universal 24 V DC power adapter
  Power Consumption:	Max. 40 Watt
  Display:	128 x 64 pixels graphical LCD, 70 mm x 40 mm, white illuminated
  Menu Language:	English
  User Input Method:	Illuminated tactile navigation button with Triple I function

Care and Maintenance

• Though robust in design, this instrument is sensitive. Never drop it or knock it over.
• For the most accurate and reproducible results, do not operate the machine in direct sunlight or strong overhead lighting.
• Avoid using the machine outside specified conditions.
• Please take note that relative humidity will influence the results obtained by the machine.
• Do not store the machine in high relative humidity environments to prevent corrosion.
• Always make sure the instrument is connected to a grounded mains outlet.
• Maintenance and inspection should be carried out at the correct intervals.
• Operating personnel should be informed before starting with maintenance or repair work .
• Always make sure the instruments power is turned off and the instrument is not connected to a socket while adjusting any electrical component whenever maintenance, inspection or repair work is done.
• Do not open the instrument. In case of malfunction always consult the manufacturer.
• Never touch electronics or circuit boards when not ESD secured.
• The drying time recorder is subject to some natural wear and must be inspected from time to time to ensure that it is in fault-free condition.
• When in use it is not always possible to avoid some spill of paint on the work surface. Try to keep the instrument as clean as possible to prevent distortions of functions. Always clean the instrument thoroughly after use.
• To clean the instrument properly use a suitable solvent to dispose remains of paint or ink.
• Never use aggressive solvents such as MEK or Acetone as this might damage the coating of the machine.
• Never clean the instrument by any mechanical means such as a wire brush or abrasive paper. This may cause, just like the use of aggressive cleaning agents, permanent damage.
• Wear gloves during cleaning; Don’t spill an overdose of solvent during cleaning.
• Cleaning materials must always be used and disposed of correctly.

Drying Time Recorder complete with six needles, six weights (5g each), two glass beds, power cord and adapter 24VDC