Pensky-Martens Closed Cup Flash Point Tester

Article No. 11476

Pensky-Martens Electric Flash Point Test

Electrically heated model is equipped with a 1000W nickel-chromium heater with stepless variable control for accurate, repeatable temperature rate of rise settings per specifications.
Heater unit is enclosed in a stainless steel housing with cooling vents. Includes line cord receptacle and switch for accessory slow speed stirrer.
115 Voltage

Select your model

excl. taxes & shipping cost

Features

Used for the flash point determination of fuels, lubricating oils, liquids containing suspended solids and liquids that tend to form a surface film during testing.
Determines flash points of a wide range of products by a closed cup method with two option speed stirring of the sample.
Extensively used in shipping and safety regulations for detection of contamination by volatile and flammable materials in fuel oils and lubricating oils, and for characterization of hazardous waste samples.
Smooth operating cover mechanism slides shutter open and applies test flame at the turn of a knob.
Cover fits over brass test cup and includes pilot flame, test flame reference bead, built-in stirrer and plated brass thermometer ferrule.
Requires a stirrer/motor accessory. Order Stirrer motor and thermometers separately.
Require a gas regulator and an external source of flame ie: propane/butane bottle or bbq tank (not supplied), as per the ASTM methods.
Mounted on a sturdy cast iron base.

Technical Attributes

Data

Length x Width x Height, in.(cm):	9.5 x 8 x 22.5 (24 x 20 x 57)
Net Weight:	K16000: 21 lbs (9.5kg) K16203/K16273: 24 lbs (10.9kg)
Conforms to the Specifications:	ASTM D93; AASHTO T73-811; IP 34; ISO 2719; DIN 51758; FTM 791-1102; NF M 07-019
Electrical Requirements:	115V 60Hz, Single Phase, 6.5A 220-240V 50/60Hz, Single Phase, 3.4A
Shipping Information:	Shipping Weight: 30 lbs (13.6kg) Dimensions: 3.1 Cu. ft.