Coverall Bend and Impact Tester
Article No. 1125
Coverall Bend - Impact Tester
Impact Tester
- Complies with ASTM D3281
Features
The Coverall Bend and Impact Tester is designed to test the flexibility and impact resistance of coatings.
- Graduated guide tube up to 160 inch-pounds of force
- Redesigned guide tube to easily hold the weight during sample change-over
- Indenter built into the weight
Technical Attributes
-
- Weights included
- 4 lb
-
- Scale
- English
-
- Weight
- 8.2 kg
-
- Weight
- 18 lb
-
- Dimensions: L x W x H
- 25 x 25 x 127 cm
-
- Dimensions: L x W x H
- 10 x 10 x 50 in
Technical Specifications
General
Standards
Procedure
Impact Test
For impact studies, the top block is leveled with the plug removed exposing a 1.43 cm (0.563 in) hole. The 1.27 cm (0.50 in) diameter, round-nosed end of the 4 lb weight may now be dropped from any height along the graduated scale on the guide tube from 0 to 160 inch-pounds.
Bend Test
To make a bend test, the coated panel 3” x 4” (0.048” thickness) is first bent 180° over the 1/8” rod. The bent panel is placed between the parts of the hinge. Then the impact tool, flat face down, is dropped from any desired height onto the upper part of the hinge. The cylindrical fold in the panel is squeezed into a conical shape.
Delivery Content
Base with arm support
Guide tube with inch-scale (1568)
Falling weight 4 lbs (1571)
Punch
Manual
Guide tube with inch-scale (1568)
Falling weight 4 lbs (1571)
Punch
Manual
Downloads
Manuals
Safety Instructions