Tramex Concrete Moisture Meters
Article No. 14720
Concrete Moisture Encounter 5, CME5
- CME5 Concrete Moisture Meter
- Clear easy-to-read analog dial
- Non-destructive in operation with no need to probe, drill or mechanically damage the surface
Features
The Concrete Moisture Encounter detects and evaluates the moisture conditions within the slab or screed by non-destructively measuring the electrical impedance. A low frequency electronic signal is transmitted into the material under test via the electrodes in the base of the instrument. The strength of this signal varies in proportion to the amount of moisture present in the material.
- Concrete moisture meters used for measuring moisture content in concrete floors and slabs, and humidity in wood and building materials.
- Determines the strength of the current and converts this to a moisture content value for concrete slabs and a comparative value for other cementitious floor screeds.
- Instant and precise readings to a depth of approximately 3/4" into the slab.
- They measure quantitative moisture content % in concrete using Gravimetric testing as a baseline.
- Bluetooth connection to accompanying IOS & Android App allowing for continual development and integration of apps and reporting.
- Hold function "freezes" meter reading when inspecting areas where the meter face is not visible, and for easy recording of data.
- Reproducible and reliable results.
- Spring-loaded contact pins compensate for uneven concrete and boost signal penetration.
- Rugged ergonomically designed enclosure.
- Two models available:
- CMEX
- CMEX5
Technical Attributes
-
- Data
-
Part No.: 14720 14719 Size: 6.3" x 3.5" x 1.5" (160mm x 85mm x 38mm) 7.1" x 3.4" x 1.6" (180mm x 85mm x 40mm) Weight: 12.1oz (344g) 12.59oz (357g) Construction: ABS Body Power: 2 x AALR6 ALKALINE (included) Display: Analog Digital Depth of Penetration: Approx. 3/4" (20 mm) Measuring Range: Moisture Content for Concrete 0 to 6%
Comparative for Gypsum floor screed 0 to 10
Reference scale 0 to 100Moisture content for Concrete: 0 - 6.9 %
Comparative for Gypsum floor screed: 0 - 12
CM Equiv Anhydrite/Concrete: 0 - 2.7 / 0 - 4.3
Reference scale: 0 - 100
Relative Humidity 0 - 99%
(With optional Hygro-i2® probe): Humidity accuracy: 0% - 99%RH ± 2% @ 25°C / 77°F
Moisture content for wood (with optional wood pin probes): 5 - 30 %
Procedure
- To carry out tests simply brush any dust from a smooth area of concrete and also from the electrodes.
- Switch on the Concrete Moisture Encounter and place it firmly onto the surface, fully compressing the spring-loaded, signal-enhancing contacts on the base.
- Read the moisture content from the clear analogue dial.
- The Concrete Moisture Encounter is calibrated to give percentage moisture content readings on clean, bare dust free concrete floor slabs, with a depth of penetration of approx. 3/4" (20 mm).
- Readings taken on concrete slabs through paint, coatings, adhesives or other materials on the surface should be regarded as qualitative or comparative and not quantitative.
Other Variations