CeramClean II™ Cleaner
Article No. 10145
CeramClean II Cleaner, 16 oz bottle 2/pk
- CeramClean II Cleaner
- 16 oz
- 2 pack
Features
- CeramClean II cleans water, UV and most solvent based inks.
- This new innovative cleaner will keep your rolls clean and make them last longer!
- Will effectively & efficiently remove dried ink from the engraving on your anilox roll without damaging the cell structure.
- Removes: Water, UV based inks & in most cases Solvent based ink.
- Will assist in the removal of roll staining. (Off press cleaning is recommended)
- New bottle is translucent so you can see how much product is left and reorder on time.
- This new bottle design has a black cap and easier to follow instructions.
Procedure
- As with all cleaning products gloves & eye protection should be used.
- Squirt a quarter size dollop of cleaner on a clean damp rag.
*NOTE: Water & UV based inks use water to dampen the cleaning rag/cloth. Solvent based inks you must use solvent to dampen the cleaning rag/cloth. This should easily clean a 10” to 13” face roll. Adjust cleaner amount to the face length of your roll using the chart on the reverse side. - With the CeramClean II™ on a clean damp rag, scrub the face of the anilox in a circular motion. You should not need to use any more cleaner.
- After cleaning the entire roll face with cleaner, take a clean rag & wipe off any excess. Ink should be present on your wipe off rag.
- Rinse the roll thoroughly with water or solvent to ensure all the cleaning solution is free from the engraved cells. *NOTE: Water & UV based inks use water to rinse the anilox rolls off. Solvent based inks you must use solvent to rinse the anilox rolls off.
- Repeat this process as necessary. One cleaning should be all that is needed for the average roll. If your anilox roll is severely plugged with ink & has not been cleaned for a long period of time, repeat the process above until the clean wipe rag is free of ink residue.
Other Variations