TQC Automatic Film Applicator Standard

• Data

  Traverse Speed:	0.1 - 500 mm/s
  Traverse Speed Accuracy:	+/- 1% of set speed
  Stroke Length:	50 – 430mm / 1.97 – 16.93 in
  Stroke Length Accuracy:	+/- 2 mm / +/- 0.08 in
  Max. Test Chart Size:	515 x 300 mm / 20.28 x 11.81 in
  Max. Test Chart Thickness:	9 mm / 0.35 in
  Max. Thickness of Test Substrate:	35 mm / 1.38 in incl. coating
  Max. Vacuum Area:	DIN A3 / Scrub
  Automatic Vacuum Areas:	DIN A5, DIN A4, DIN A3, Scrub
  Wire Bar Spiral Area:	max. 325 mm / max. 12.8 in
  Min. Wire Bar Length:	345 mm / 13.58 in
  Max. Wire Bar Diameter:	10 mm / 0.39 in at fixation points
  Width Alternative Applicators:	max. 300 mm / max. 11.81 in
  Height Alternative Applicators:	10 -80 mm / 0.39 - 3.15 in
  Dimensions and Weight	Depth: 490 mm / 19.29 in Width: 640 mm / 25.2 in Height: 290 mm / 11.42 in Net weight: 33 kg
  Power Supply:	100 - 240 V / 50 - 60 Hz
  Power Consumption:	max. 50 W
  Display:	480 x 272 pixel TFT display
  Controls:	5-key Navigation Switch, Mouse and Keyboard (optional)
  Menu Languages:	English, Spanish, Chinese, Polish, German, French, Italian, Japanese, Russian

Safety Precautions & Disclaimer
Always clean the instrument after use. Do not use compressed air to clean the instrument. Never perform repairs or service to the instrument yourself. This should be done by TQC or selected distributors.

Always make sure the instrument is connected to an earthed socket. Maintenance and inspection should be carried out at the correct intervals. Operating personnel should be informed before starting with maintenance or repair work. Always make sure the instruments power is turned off and the instrument is not connected to a socket while adjusting any electrical component whenever maintenance, inspection or repair work is done. Do not open the instrument. In case of malfunction always consult the manufacturer. The right of technical modifications is reserved.

The information given in this sheet is not intended to be exhaustive and any person using the product for any purpose other than that specifically recommended in this sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk. While we endeavour to ensure that all advice we give about the product (whether in this sheet or otherwise) is correct we have no control over either the quality or condition of the product or the many factors affecting the use and application of the product. Therefore, unless we specifically agree in writing to do so, we do not accept any liability whatsoever or howsoever arising for the performance of the product or for any loss or damage (other than death or personal injury resulting from our negligence) arising out of the use of the product. The information contained in this sheet is liable to modification from time to time in the light of experience and our policy of continuous product development