CurveX 4 Oven Temperature Data Logger
Article No. 15300
CurveX 4 Oven Temperature Data Logger
The CurveX 4 is an intelligent temperature data logging system that was specially designed to control curing processes across the coating industry. Combined with the Ideal Finish Analysis software, this data logger is vital for any paint curing oven - providing insights into oven temperature efficiencies, streamlining operations and reducing operation costs.
Features
- 8 channels
- Advanced software with Curve index number
- Operate through only 3 large buttons
- Meaningful feedback of multi coloured LED's
- Factory calibrated for immediate use
- Downloads data through a standard USB port
- Rechargeable battery pack through USB connector
- Large memory can store a total of 160,000 readings. The memory is divided into 20 memory blocks of 50,000 readings each. For each new batch, the CurveX 4 will always start at the beginning of the next memory block, even if the previous block was only partly used. loggings that take longer than 50,000 readings are stopped at reading number 50,000. The maximum number of batches that can be stored is 20.
- Programmable "paint type" memory for immediate "pass / fail" result
- Compatible with Ideal Finish Analysis software, which allows you to analyze the logged temperature data and create detailed reports. Advanced oven profiling features like cure data analysis, ideal cure and tolerance bands, together with a wide range of display, report and printing options, making CurveX oven logger the most flexible temperature logging solution available.
- Flat design, only 16 mm, for use in low clearance ovens
Technical Attributes
-
- Data
-
CurveX 4 Logger Technical Specifications: Measuring Range: -100°C to 1200°C Operating Temperature: 0°C to 60°C Accuracy: ±1°C / 1.8°F Channels: 8 Sample Interval Time: 1 s to 60 min Memory: 20 batches with 50.000 readings Display: Three multi-color LED's Interface: USB-C Housing Material: Anodized Aluminium / Plastic Dimensions (D x W x H): 110 x 85 x 35 mm Power Supply: 2 AA batteries (standard or rechargeable) Battery Life Time*: 35h with rechargeable batteries, 60 with alkaline batteries Weight: 190 g / 6.7 oz. Industrial Physics Ideal Finish Analysis software Supported Operating Systems: Windows vista, Windows 7 and Windows 8 / 8.1, Windows 10 Platform: 32 b or 64 b Memory: 32 MB Required Hard Disk Space: 128 MB *After 300 cycles charge from 0 to 100% the battery will retain a capacity of 80%. In general such battery need replacement after approx. 2 years continuous use.
Delivery Content
CurveX 4 Standard 8 channel Oven logger, USB cable, USB charger, Ideal Finish Software License Key, USB stick with Ideal Finish Analysis Software, Probe ID-kit, Calibration certificate and Manual CurveX 3 Standard Small protective case