QNix® 1500 Coating Thickness Gauges
Article No. 11041
QNix 1500 Coating Thickness Gauge
The QNix® 1500 combination coating thickness gauge, and a reliable companion in the automotive and corrosion protection area.
Features
- Integrated Fe/NFe probe with wear-proof ruby tip for long-term use
- Large measuring range of up to 5000 µm
- Takes measurements of non-magnetic coatings on steel and iron as well as all isolating coatings on non-ferrous metals such as aluminum, copper, zinc
- Readable duplex LCD display
- Precise presentation of readings, battery condition, unit, mode and serial number
- Readings displayed in µm or mil.
- Flat design of this gauge allows for measurements at difficult-to-access points
- Simple flexible use, even at wide stretching surfaces
- High reliability and precision even in tough operating conditions.
- No calibration, no change of probes
- Automatic ON/OFF
- No switching between measuring ranges required
- Convenient one hand operation
- Storage of last reading
- V-groove for safe measurements on axles and rods
- 9-Volt-Block battery for many thousands of measurements
Technical Attributes
-
- Data
-
Measuring Principle:Two magnetic measuring principles:
Fe*: Magnetic-Flux/Hall Effect ref
NFe*: Eddy Current refProbe Type: Integrated Measuring Ranges: Fe: 0.0 - 5000 µm
NFe: 0.0 - 5000 µmMetric System µm/mil: Yes Measuring Interval: Single measurement: 1250 ms Display Metric Measuring Range: From 0 - 999 in µm, 1.00 - 5.00 mm Resolution: 1 µm in the measuring range 0.0 - 99.9 µm, 1 μm in the measuring range 100 – 999 μm, 0.01 mm in the measuring range 1.00 – 5.00 mm Minimum Measuring Area: 10 x 10 mm Accuracy (according to Automation Dr. Nix Standards): ± (1 μm + 2 %*) in the range 0.00 – 999 μm ± 3.5 %* in the range 1 – 5 mm (*) of reading
Minimum Curvature: Convex: 5 mm; Concave: 25 mm Minimum Substrate Thickness: Fe: 0.2 mm
NFe: 0.05 mmDisplay: Digital LCD Temperature Range: 0 - 50°C (32 - 122°F) Permitted Storage Temperature: -10 - 60°C (14 - 140°F) Power Supply: 9V Dimensions (L x W x H mm): 6.5 x 2.5 x 1.3" (166 x 64 x 34 mm) Weight Including Battery: Approx. 5.33 oz. (150 g) * of the measurement
Fe* Measuring of non-ferroumagnetic coatings on ferromagnetic substrate, for example measuring on steel- or iron-substrates.
NFe* Measuring on non-ferromagnetic and electrically non-conductive coatings (insulating coatings) on non ferromagnetic and electrically conductive substrate, for example measuring on aluminum-, zinc-, brass-, and certain stainless (high grade) steel substrates.
Standards
DIN EN ISO 2808, DIN 50981, DIN 50984, ISO 2178, BS 5411 (3 & 11), BS 3900 - C5, ASTM B499, ISO 2360, ASTM D1400, ASTM D1186, ASTM D7091
Delivery Content
QNix® 1500, Fe or Fe/NFe reference plate, 9V alkaline battery, Test certificate, Operating instructions, and Plastic case
Downloads