ZMM 5000 Road Marking Film Thickness Gauge
Article No. 14730
Road Marking FTG -12 mm to +12 mm w/case
Digital Measuring Gauge For Road Markings. The ZMM 5000 digital marking gauge enables you to get a fast and precise determination of the dry film thickness of road markings and similar coatings.
Features
Digital display with reliable measuring results within seconds and easy to handle
Measurements relative to the substrate or to the marking itself are possible (upwards and downwards measurements)
Optional bridge for measurements over the whole width of the marking to sketch a cross section as well as for representative measurements on wide road markings
For all types of road markings with or without drop-on materials and reflective beads
For direct measurements on site on the road or of samples in the laboratory
For national traffic authorities, road laboratories, manufacturers of road markings and contractors
Technical Attributes
-
- Data
-
Material: Anodized aluminum, red Dimensions: 180x70x76mm Weight: 880 g Measuring Range: -12.5 mm to +12.5 mm
-0.5" to +0.5" (optional)Resolution: 10 μm Bearing of Surface: min. 50 mm x 80 mm Display: Digital Standards: DIN EN 13197, DIN EN 13212 Warranty: 2 year guarantee Digimatic Indicator: 1 year
Procedure
- Place the marking gauge with the three feet onto or beside the marking to be measured
- Press the measuring arm downwards until it is on the marking or, respectively on the substrate
- Read off the measurement value
- Optional measuring bridge is placed on the substrate on both sides of the marking
Delivery Content
Comes with case