Re-Circulating Chiller Unit
Article No. 13303
MFFT Re-Circulating Chiller, 100-240 Vac
The Re-Circulating Chiller is used with the MFFT and it is Plug and play, simple to install and no programming required.
Features
- For use with Rhopoint MFFT
- Ultra-compact design
- 0.5kW at 20°
- Simple Operation
- Low cost of purchase and operation
- Universal 90-264 VAC input voltage and 50/60Hz input frequency
- Automatic overcurrent fault-cleared restart mode
- Vapor compression technology
- Brazed plate heat exchanger evaporator technology
- Continuous running, duty settable, low temp fridge cutoff control methods
Technical Attributes
-
- Data
-
Physical Attributes Physical Dimensions (LxWxH): 435 x 180 x 380mm Weight: Dry 20kg, wet 21kg Noise level (dB(A)): 64 (optional manual adjustment) Cooling Capacity (setpoint 20, ambient 20): 0.5kW Temperature Control Attributes Duty at +20°C ambient, Setpoint +20°C (kW): 500
Duty at +20°C ambient, Setpoint +15°C (kW): 300 Refrigerant & Charge: R134a, 360g Temperature Range (standard): +4°C to +35°C (setpoint dependent on load) Temperature Stability (with constant load): ±0.1°C Maximum THR (Total Heat Rejection): 850W Maximum Ambient Air Temperature: +35°C Water Circuit Attributes:
System Volume (L): 0.64 Pump Type: Sanso 24VDC brushless centrif pump 1.9bar(d/h) 3L/min (o/f) Pump Capability: 3.5L/min @1 bar Standard Fittings: Pushfit 12mm Standard Chemical Compatibility: Tap Water, DI-water Electrical Attributes (90-264Vac, 1~/2~, 50-60Hz) U-spec: Yes, 2A@115Vac, 1A@230Vac, L+N+E or L1+L2+E
Downloads