Features

Open coat sandpaper strips cut to 12.7 mm x 160 mm strips
They include a pressure sensitive adhesive to attach the strip to the periphery of CS-0 (S-32) resilient wheels
Consists of a very fine aluminum oxide grit, graded as 180 ANSI-CAMI which has an average particle size that is approximately 78µm (0.00304 inches).
Applications include high pressure decorative laminates, wood flooring, plastics, furniture surfaces, paints and varnishes.

Technical Attributes

Data

Model	Abrasive Action	Examples of Material Tested	Notes
Calibrase® Abrading Wheels
CS-8	Extremely Mild	Labels	Do not exceed 500g load; reface with S-11 disc
CS-10F	Very Mild - Mild	Safety glazing, transparent plastics	Do not exceed 500g load; reface with ST-11 refacing stone
CS-10	Mild - Medium	Organic coatings, plastics, textiles, leather	Reface with S-11 disc
CS-10W	Mild - Medium	Textiles	No colorant, eliminates color transfer from the wheel to the specimen; reface with S-11 disc
CS-17	Medium - Harsh	Anodized aluminum, powder coatings, ceramics, plastics and enamels	Reface with S-11 disc
NOTE: Shelf life is dependent on proper storage conditions: temperature = 23 °C ±2 °C, relative humidity = 50% ±5%. Calibrase wheels should be refaced with S-11 disc, except for CS-10F. Do not use AFTER expiration date. Custom formulations available.
Calibrade® Abrading Wheels
H-38	Mild	Woven and non-woven fabrics	Do not exceed 500g load; reface with multi-point diamond tool
H-10	Mild - Medium	Steel and ferrous alloys (including the effect of hardening and tempering treatments)	Reface with single-point diamond tool
H-18	Medium - Coarse	Rubber (non-tacky), woven textile fabrics, coated fabrics, flexible plastic sheet	Reface with single-point diamond tool
H-22	Harsh	Rubber, linoleum, leather, automobile floor coverings, concrete	Reface with single-point diamond tool
NOTE: Calibrade wheels should be refaced with Wheel Refacer and single point diamond tool, except for H-38. Calibrade wheels do not have an expiration period. Custom formulations available.
Specialty Wheels and Abradants
CS-0/S-32	Rubber (non-abrasive)	Dental pastes, cleaning powders	Do not use after expiration date; clean with isopropyl alcohol
CS-5	Wool Felt (dense)	Textile fabrics (when the service wear requires one fibrous material to rub against another)	Do not exceed 500g load
S-33	Sandpaper Strips	Vitreous and porcelain enamels, paints, metallic coatings, furniture surfaces	Use with CS-0 wheels; 12.7 x 160 mm strips include adhesive; P320A FEPA aluminum oxide (avg. particle 46.2µm) closed coat on "A" weight paper (70 - 100 g/m²)
S-42	Sandpaper Strips	High pressure decorative laminates, wood flooring, plastics, furniture surfaces, paints and varnishes	Use with CS-0 wheels; 12.7 x 160 mm strips include pressure sensitive; 180 ANSI-CAMI aluminum oxide (avg. particle 78µm) open coat on "A" weight paper (70 - 100 g/m²)
NOTE: Sandpaper should be stored and conditioned in a controlled environment: temperature = 23 °C ±2 °C, relative humidity = 50% ±5%