CHLOR TEST™ Surface Salt Test
Article No. 10839
Chlor*Test Kit Surface Salt 50/pk
- Chlor-Test Kit surface salt
- Accurate way to perform chloride field testing
- Uses a unique patented extract solution, CHLOR*EXTRACT™, to retrieve surface chloride contamination.
- Designed to be used on vertical, horizontal or overhead surfaces.
- 50 pack
Features
- The CHLOR*TEST™ is a surface salt test that was developed for ease of use and to prevent outside and cross contamination
- It offers consistent, safe and reliable testing results for chloride contamination. An easier to use, more accurate field test than anything before
- Portable surface salt test
- Chloride "Ion Specific" test
- Easy to use
- Prevents cross contamination
- Reliable results
- No dangerous hypodermic needles on the job site
- Applications: bridges, aircraft, mining facilities, ships, marine structures, storage tanks, cooling towers, pipe lines, power plants, offshore rigs, petrochemical plants, pulp and paper mills, steel fabrication, electronics
- No temperature correction is necessary at the sample solution of 41°F (5°C) to 176°F (80°C)
- Interferences - Coexistence of Bromide ion, lodide ion or Cyanide ion respectively with Chloride ion gives higher readings. Sulphide ion produces a brown stain and the coexistence with Chloride ion produces a brown stain in the bottom of the stained layer and gives higher readings. PH value within 3.5 to 11 does not affect the readings. Less than pH 3.5 or more than pH 11 gives higher readings. Chemical Reaction in the Detector Tube: NaCl + Ag2CrO4 = AgCl
Technical Attributes
-
- Data
-
Measuring Range: 5 - 200 ppm Sampling Time: 1.5 minutes Color Change: Pink - White Detectable Limit: 1 ppm Storage Condition: In a cool and dark place, not exceeding 77°F (25°C )
Procedure
- Pour CHLOR* EXTRACT™ into CHLOR* SLEEVE™.
- Peel off protective backing, pinch CHLOR* SLEEVE™ and adhere sleeve to surface to be tested.
- Massage extract against surface for 2 minutes, then peel from surface.
- Safely snap off both ends of the titration tube with the metal cutter.
- Insert glass titration tube into sleeve. Approximately 2 minutes later, a simple color change will identify the chloride level in both parts per million and micro grams per centimeter squared. Can be used on vertical, horizontal or overhead surfaces.
You can also insert shoelace into side holes of the box and tie it around waist or belt loops for hands-free testing.
Delivery Content
Test kits include: titration tube snapper, strap, clip, pre-measured bottle of Chlor*Rid extract solution, sleeve, titration tube, aspirator, and operating instructions
Downloads
Other Variations